Choosing a garden shed is easier when you treat it as a planning decision rather than a simple product purchase. This guide helps you compare timber, metal, and plastic sheds; estimate the floor area, access space, foundation work, and features you actually need; and build a repeatable checklist for reviewing costs before you order.
Overview
The right shed should fit three things at once: your storage needs, your garden, and the conditions at the installation site. A shed that looks affordable on a product page may need a prepared base, delivery access, ventilation, security upgrades, or internal storage before it becomes useful. Conversely, buying substantially more shed than you need can reduce valuable planting or patio space and increase preparation work.
Start by separating the decision into four parts:
- Capacity: what must be stored now, and what bulky items may be added later?
- Construction: which material and roof design suit your climate, maintenance preferences, and budget?
- Site: can the ground, drainage, access route, and foundation support the shed?
- Features: which options improve daily use, security, ventilation, or natural light?
Before comparing models, sketch the shed into your wider backyard design. Allow room to open doors, move equipment, inspect the walls, and maintain nearby planting. A small garden shed may be sufficient for hand tools and seasonal supplies, while a larger building may be necessary for bicycles, a mower, workbench, or garden furniture. If you need help fitting a shed into a compact plot, see the small backyard design planner.
How to estimate your shed requirements
1. Inventory the contents
Group your belongings by shape and frequency of use rather than counting individual items. Make separate groups for long tools, stacked containers, wheeled equipment, boxes, bicycles, garden furniture, and items that need a work surface. Record the largest item in each group and note whether it must be lifted, rolled, or carried through the door.
For each group, estimate the footprint it needs on the floor. A simple planning formula is:
Required storage area = occupied floor area + access area + working or unloading area.
The access allowance matters. Shelves can increase capacity, but a shed packed wall to wall is difficult to use. Keep frequently used tools near the entrance and reserve higher shelves or rear corners for seasonal items.
2. Measure the site, not just the available gap
Measure the maximum length and width of the proposed location, then check the route from the delivery point. Record gates, steps, narrow passages, low branches, walls, fences, and changes in level. Compare these measurements with both the shed’s external dimensions and its packaged dimensions, which may differ.
Also mark doors, windows, drains, utility access points, and areas where rainwater needs to flow. Leave enough clearance to clean the outside, treat timber, inspect the roof, and remove standing vegetation. Avoid assuming that a tight fit will be acceptable simply because the building physically fits.
3. Compare the full project cost
Use this planning formula rather than looking only at the advertised shed price:
Total project allowance = shed + foundation materials or installation + delivery + assembly + site preparation + internal storage + security and weatherproofing additions.
Some suppliers include delivery or assembly while others list them separately. Ask for each element in writing, and check whether the quoted foundation matches the actual ground conditions. Keep a separate contingency allowance for unknowns such as removing an old base, correcting an uneven site, or improving access.
| Material | Useful strengths | Points to check | Typical use case |
|---|---|---|---|
| Timber | Natural appearance, easy to paint or adapt, and often suited to shelves, hooks, and workbenches. | Requires attention to moisture, roof condition, ventilation, and surface treatment. Confirm how the floor and wall construction resist ground moisture. | Workshops, garden rooms used for storage, and plots where appearance is important. |
| Metal | Durable shell, resistant to many forms of impact, and generally low in routine surface treatment. | Check condensation control, corrosion protection, edge safety, insulation needs, and how shelves or hooks can be fixed. | Tool storage, equipment storage, and sites where a robust exterior is preferred. |
| Plastic or resin | Lightweight construction, straightforward cleaning, and resistance to some common moisture-related problems. | Check panel rigidity, UV protection, floor strength, wind anchoring, and whether the design accepts your preferred storage accessories. | Small garden sheds, bins, hand tools, and low-maintenance storage. |
No material is automatically the best shed material for every garden. Compare the base, roof, door hardware, ventilation, warranty terms, and installation instructions alongside the walls. For moisture-sensitive contents, review the shed ventilation and condensation guide.
Inputs and assumptions to record before buying
Use the following worksheet when comparing products. Recording the inputs makes it easier to revisit the decision if prices, priorities, or garden plans change.
- External footprint: maximum length and width available, including the maintenance gap you intend to leave.
- Internal floor area: the usable area after allowing for wall thickness, door swing, and any internal framing.
- Wall height: check whether tall tools, shelving, or a workbench will fit without obstructing roof framing.
- Door opening: record clear width and height, not just the overall door size. A wide opening may be more valuable than extra floor area.
- Roof style: a gable roof may offer useful headroom, while a pent or lean-to roof can suit a boundary or restricted height. Check water runoff and the highest point.
- Foundation: identify whether the site needs a level slab, paving, framed base, compacted aggregate, or another solution recommended by the manufacturer.
- Ground and drainage: note slope, soft spots, existing paving, runoff, and any risk of water collecting below the floor.
- Windows and ventilation: decide whether daylight is useful and whether vents can reduce stale, humid air without compromising security.
- Security: compare door construction, hasp or lock compatibility, hinges, window protection, lighting, and anchoring. The garden shed security guide covers these choices in more detail.
- Future allowance: leave capacity for one or two likely additions, such as a mower, bicycle, rain barrel equipment, or seasonal furniture.
Check local planning, property, drainage, and boundary requirements before installation. Rules can depend on location, building dimensions, intended use, and proximity to boundaries, so confirm the current guidance with the relevant local authority or property professional rather than relying on a general online statement.
Worked examples
Example A: compact tool storage
Suppose the inventory contains hand tools, bags of growing media, a hose, small pots, and a folding chair. The largest item is the hose reel, and most tools will hang on the wall. In this case, prioritise a clear door opening, wall height for hooks, and a dry, level base. A compact timber, metal, or plastic shed could work; the deciding factors are likely to be ventilation, security, appearance, and how easily the chosen model accepts shelving.
The estimate should include the shed, base, delivery, assembly if needed, wall storage, and a small allowance for moisture control or anchoring. Do not use every available square metre for boxes: retain a narrow access route to the rear and keep heavy items low.
Example B: mower, bicycles, and seasonal furniture
Here, floor area alone is not enough. The shed needs a door wide enough for the mower and bicycles, turning space near the entrance, and a layout that allows one item to be removed without unloading everything else. Measure the longest and widest equipment, then add clearance for handles and movement. A taller shed may provide more useful capacity than a wider one if the site is narrow, but verify that the roof height and delivery route allow it.
Include a stronger foundation and anchoring plan, internal hooks or rails, and security features in the initial estimate. If the shed will be used as a workshop, add lighting, power planning, and ventilation as separate decisions rather than treating them as minor accessories.
Example C: replacing an old shed
Do not assume the existing base can be reused. Check its level, dimensions, drainage, cracking, and position relative to the replacement shed. Measure what is currently stored, remove unused items, and add only the capacity you can justify. This is often the best opportunity to improve the layout: place everyday tools by the door, add vertical storage, and keep chemicals or sharp equipment secure and clearly separated.
When to recalculate
Revisit your shed estimate whenever a major input changes. That includes supplier pricing, delivery or assembly charges, foundation materials, local requirements, or the contents you plan to store. A spring review is useful before the main gardening season, especially if you are buying a mower, raised-bed supplies, patio furniture, or water-collection equipment.
Recalculate before moving house, replacing a damaged shed, changing the garden layout, or converting storage into a workshop. Also review the plan after a wet season if the site has drainage or condensation problems. The seasonal shed maintenance checklist can help identify whether repair is more practical than replacement.
For a final buying check, print your measurements and confirm five things: the shed fits the site, the delivery route works, the foundation is suitable, the door accommodates your largest item, and the full project allowance includes installation and storage accessories. Then compare at least two suitable models on those same inputs. A repeatable comparison is more reliable than choosing the shed with the largest floor area or the lowest initial price.